Galler

TELECOM INFRASTRUCTURE

AC Energy Meter - 3Channel (Model: G-AC-M3P)

AC Energy Meter - 3Channel (Model: G-AC-M3P)

  • 3-channel wide-range sensing - monitors 3 lines simultaneously, 4A-200A at 11mV/A sensitivity.
  • Isolated communication & sensing - RS-485 with isolated voltage/current sensing to cancel noise, interference, and protect the controller from spikes.
VIEW DETAILS
Remote Terminal Unit (Model: RTU0253)

Remote Terminal Unit (Model: RTU0253)

  • Multi-vendor device consolidation - connects many devices over a single channel and integrates any Modbus/ASCII/proprietary protocol at the RTU, removing OEM dependency.
  • Remote configuration & management - configure, upgrade firmware, and troubleshoot all connected devices remotely via a web designer app, with no site visits.
VIEW DETAILS
DC Energy Meter with Inbuilt RTU (Model: RTDCEM 1173-3-4CH)

DC Energy Meter with Inbuilt RTU (Model: RTDCEM 1173-3-4CH)

  • 4-channel DC metering with Class 1 accuracy - Hall-sensor current sensing, ±1.0% accuracy on energy/power and full-scale voltage/current, with fine resolution (0.001 kWh, 0.1V, 0.1A, 0.1kW).
  • Inbuilt RTU + remote connectivity - relays data to servers via Ethernet (5× 10/100 Mbps ports) or optional GPRS/3G/LTE module, storing 60+ days of data / 10K+ events.
VIEW DETAILS
Manageable Switch cum LAN Extender - RTS0973

Manageable Switch cum LAN Extender - RTS0973

  • Dual role: managed switch + LAN extender - combines managed switching with LAN extension over RJ-45 Ethernet on a wide 12–72V DC input.
  • SNMP management - SNMPv2 with RFC-1213 MIB compliance; generates configurable SNMP traps (ON/OFF) on input change.
VIEW DETAILS
DC Energy Meter 5+1 Channel (Model: RTDCEM1173-6CH)

DC Energy Meter 5+1 Channel (Model: RTDCEM1173-6CH)

  • 5+1 channel DC metering - 6 channels via Hall sensors (3×125A, 1×500A + auxiliary 1×150A, 1×500A) at Class 1 accuracy (±1.0% on energy/power and full-scale current/voltage), with fine resolution (0.001 kWh, 0.1V, 0.1A, 0.1kW).
  • 32-bit processing with ample storage - 8.5 MB SRAM and 16 MB flash, holding 60+ days of data / 10K+ events.
VIEW DETAILS
Smart Access Control System (Model: ACR 029)

Smart Access Control System (Model: ACR 029)

  • Multiple unlock methods - RF/MIFARE card, mobile app (Bluetooth or direct command), SMS, or LAN/LTE; NOC-integrated locks can even open without ID card or Bluetooth.
  • Centralized, user-definable access control - lock/unlock any specified door centrally, with access rights assignable per user or management level, and inside access deniable for specific users/groups.
VIEW DETAILS
HEAVY DUTY SMART 3 POINT LOCK

HEAVY DUTY SMART 3 POINT LOCK

  • High Locking Force -Generates over 500N of force to press the door gasket, ensuring a secure seal with an easy-operate torque of just 0.300NM.
  • Rust-Resistant Design -Surface-mounted construction allows quick drying and helps prevent rusting, with stainless steel liners at the locking points for added durability.
VIEW DETAILS
RACK EQUIPMENT SECURITY SYSTEM

RACK EQUIPMENT SECURITY SYSTEM

  • Hardened Secure Bolt (40 HRC) - resists rotation by chisel or pin, with a fine, irregular dimple profile that's extremely difficult to replicate or match.
  • Tamper-Resistant Carbon Steel Clamp - physically blocks tool access to the bolt opening, preventing leverage-based break-in via screwdriver, rod, or chisel.
VIEW DETAILS
Smart UPS 220VAC to 48VDC (Model: GUS4815)

Smart UPS 220VAC to 48VDC (Model: GUS4815)

  • Intelligent Battery Management System (BMS) for enhanced battery safety, performance, and real-time alarm notifications.
  • 15Ah Li-Fi Battery providing reliable backup power for up to 4 hours (48VDC × 3.125A)
VIEW DETAILS
Electro-Mechanical 3-Point Cabinet Lock (Model-Serro 2)

Electro-Mechanical 3-Point Cabinet Lock (Model-Serro 2)

  • Large power input range (isolated), 12–95 VDC operation
  • Auto-cutoff at 95V with auto-restore when voltage normalizes
VIEW DETAILS